How much weight can a motor move?

The maximum torque is given as 1.2 kg*cm (which includes the gearbox-transition), which means having wheels with an radius of 1 cm (or 2cm in diameter) will give you a force that is equivalent to 1.2 kg in weight at nominal voltage, as long as your electronics can provide a current of 300 mA (load current).

How do you measure the maximum weight that a DC motor can move?

The maximum power will be produced at the maximum rpm of the motor. Multiply the torque of the motor time the ratio of gear or belt reduction to drive the wheel axle, then divide by the radius of the wheel. Can we assume you will use wheels? The torque will tell you how much weight can be moved by the motor.

How much weight can a 2 hp motor lift?

Likewise, 1 N-m is equal to 0.7375621 ft-lb, so 1 hp = 746 N-m/sec = 550.3 ft-lb/sec. This means with 1 hp, you can lift about 550 lbs (250 kg) at a rate of 1 ft/sec, 1100 lbs at a rate of 0.5 ft/sec, 225 lb at a rate of 2 ft/sec, 1 lb at a rate of 550 ft/sec, and so on.

IT IS INTERESTING:  Frequent question: Do new car engines need to be broken?

How much weight can a 3 HP motor lift?

Manufacturers have added excessive force auto shutoff and a nylon gears that fail when too much force is exerted. Actual figures are closer to 125 lbs for a 1/2 HP and 175 lbs for a 3/4 HP.

How strong is a 12v DC motor?

Maximum Discharge Pressure: 26 psi.

How do you know how much weight a motor can lift?

Force equals the weight of the object acting at the centre of the shaft. For eg: Assume that a Motor shaft is holding a tire of weight 50kg. So the weight acting at the centre of the shaft of motor is Force(F2) = 50*9.81 N.

How do you calculate load carrying capacity of a motor?

If you know the out put specifications of the motor & rated speed its easy calculate the Load that you can put on it. Power = 2*PI*N*. T/4500. where as torque is equal to Load multiplied by distance at which Load is applied.

How much does a 1 hp motor weight?


Catalog Number: VM3546T
Spec Number: 35A003P674H4
Description: 1HP,1750RPM,143TC,TEFC,3PH,60HZ
Ship Weight: 34 lbs.

How much horsepower does it take to move 100 pounds?

100 lbs = 10 hp = one tenth (0.10) of a second off of the 1/4 mile time.

How much weight can a power window motor lift?

The window track can lift about 30 pounds straight up.

How strong is 1HP?

Horsepower, the common unit of power; i.e., the rate at which work is done. In the British Imperial System, one horsepower equals 33,000 foot-pounds of work per minute—that is, the power necessary to lift a total mass of 33,000 pounds one foot in one minute.

IT IS INTERESTING:  Do mid engine cars handle better?

What size of motor is required to lift 800 pounds in 40 seconds through 40 feet?

Problem Answer:

The size of the motor is 48 horsepower.

How many pounds is a horsepower?

Calculating PWR

It’s very easy to calculate a power-to-weight ratio. Simply divide the power output of a vehicle by its weight. For example, if you have a car that weights 2000 pounds and has 250 hp, the PWR will be as follows: 250 / 2000 = 0.125 hp for every pound of car.

Which is the most powerful DC motor?

EC-4pole Program

The most powerful brushless DC motors by maxon. Ø 22 – 32 mm, 90 – 480 W. 4-pole motors for maximum performance per unit of volume and weight guarantee a long service life.

What is the speed of 12V DC motor?

25,000rpm motor dc 12v has acquired the highest response among electronics hobbyists for high speed operations.

How much power does a 12V motor use?

If the DC motor is 12 v and has 3 amps, then is 36watts and a 12 volt battery on 75 amps/h will give you 12*75=900watts/36 = 25 hours.

Service station