Your question: What type of transmission fluid does a Ford use?

Dexron III/Mercon – This is one of the most common fluids on the market. Most GM and Ford units call for this type of ATF, as well as many imports. If your owners manual recommends any form of Dexron, or any Mercon – other than Mercon V – this is the fluid you want.

What is the difference between Type F and dexron transmission fluid?

What is the difference between DEXRON® III/MERCON® and type F transmission fluid? The Valvoline Type F transmission fluid is a high quality NON-friction modified fluid. DEXRON® III/MERCON includes friction modifiers in the fluid additive package.

Can I use ATF 4 instead of ATF 3?

ATF+4 is backward compatible with ATF+3 so you can use it with no issues.

What kind of transmission fluid does a Ford F 150?

Fords that Use Mercon or Mercon V

Mercon V is a fully synthetic automatic transmission fluid.

IT IS INTERESTING:  Will car run if engine is blown?

What vehicles use Type F transmission fluid?

Mobil Type F ATF is recommended by ExxonMobil for use in applications requiring Type F fluid as follows: Automatic transmissions in certain older Toyota, Mazda, Volvo, and other imported vehicles that require an ESW-M2C33-F fluid. In addition, this type of ATF is specified for some Ford power steering systems.

Can I put Type F transmission fluid?

RAY: If you put Dexron, Mercon or Chrysler 7176 transmission fluid in just about any transmission, it will perform just fine. … And in transmissions that are not designed for it, Type F fluid will cause rough shifts, and can even cause damage by making the torque converter engage before it should.

What happens if you use the wrong transmission fluid?

Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.

What’s the difference between ATF 3 and ATF 4?

Graphs in the paper show that the friction coefficient of fresh ATF+3 and ATF+4 is essentially identical, but as the fluid ages ATF+4 retains the “as new” coefficient while ATF+3 degrades.

What transmission fluid is compatible with ATF 4?

ATF +4 is a synthetic fluid for finely-tuned transmissions, so if you use a non-synthetic ATF instead of ATF +4 in a car or truck that calls for it, you could damage the transmission. You may use ATF +4 in most applications that call for older Dexron and Mercon fluids.

IT IS INTERESTING:  What type of batteries are in cars?

Is ATF 4 the same as power steering fluid?

Can ATF+4® be used as a power steering fluid in my FCA (formerly known as Chrysler) vehicle that requires ATF+4® in the automatic transmission? Yes, ATF+4® is the correct fluid to use for your transmission and power steering.

Does Walmart have transmission fluid?

Transmission Fluids – Walmart.com.

What kind of transmission fluid does a 92 Ford f150 take?

Mobil 1 Synthetic Transmission Fluid Dexron/Mercon 1 Quart.

Is Mercon V the same as Mercon LV?

Over the years, the original Mercon was supplanted by Mercon “V”, Mercon “SP”, Mercon LV, and Mercon ULV which is the latest fluid. Ford has upgraded the Mercon specifications over the years; the newer fluids are not always backward compatible with previous fluids.

What is Type F transmission fluid used for?

It is formulated to help in the following areas: reduce clutch and brake fluid slippage, show high-oxidation resistance, provide excellent shear stability, and enforce dependable anti-wear and gear protection.

What can I use in place of Type F transmission fluid?

This type of drive train fluid should not be used in automatics that require Type F. It can be replaced with Mercon or Mercon V specification.

Can I mix Type F and dexron?

As to ATF, no problem mixing Dexron and Type F, one can actually fine tune shift harshness as Type F is in fact “grippier”.

Service station