How can you tell if a transmission is AOD?

The AOD transmission can be identified in several ways. Its prominent 14-bolt pan is probably the easiest way. The pan is basically square but the back two corners are tucked in a little tighter than the front corners making the pan look like home plate with the front point cut off.

How do I identify a Ford AOD transmission?

The AOD transmission is identified visually, first to identify the AOD, then to differentiate between the AODE and 4R70W transmission.

  1. Slide under the vehicle to view the transmission pan. …
  2. Look for the electronic cable and electrical plug. …
  3. Identify differences between the AODE and 4R70W.

What vehicles have an AOD transmission?

4R70W used in all applications:

  • Ford F-Series.
  • Ford Crown Victoria.
  • Mercury Grand Marquis.
  • Lincoln Town Car.
  • Ford Mustang.
  • Ford Expedition.
  • Ford E-Series.

What is the difference between AOD and AODE transmission?

the aod uses a cable to adjust line pressure. the aode has a electical connection the right hand side of the trans that controls the epc pressure ,torque converter and shift solinoids.

IT IS INTERESTING:  You asked: Does the Jaguar XF have a Ford engine?

What year did Ford use the AOD?

The AOD was introduced for the 1980 model year and used in the 1980 to 1986 F-150, 1982 to 1993 Ford Bronco, and many Ford passenger cars. It was Ford’s first 4 speed overdrive transmission and was used to replace many of their 3 speed transmissions (C4, C5, etc).

Is the Ford AOD transmission any good?

The Ford AOD transmission was evident in cars like the Mustangs, Fairmont, and LTDs around 1980 and 1993, and it was quite unique even though not in a really good way. … The Ford AOD transmission shifting problem, therefore, gave it its unreliable performance reputation.

How do I identify my transmission?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

What year AOD is best?

’89-’93 are the best years for the AOD, they already have the better internals for anything with horsepower.

How much horsepower can a AOD transmission handle?

This unusual system can accommodate up to 450 hp or so before pieces start snapping.

How many gears are in a C4 transmission?

The Ford C4 is a three-speed, medium-duty automatic transmission introduced on 1964 model year vehicles and produced through 1981. The C4 was designed to be a lighter and more simple replacement for the original Ford-O-Matic two speed transmission being used in smaller, less powerful cars.

Ford C4 transmission.

IT IS INTERESTING:  Which car has the smoothest suspension?
C4/C5
Overview
Successor AOD

What is the difference between 4R100 and 4R70W?

The 4R100 is a big boxy case with a grid pattern on it while the 4R70W is a more rounded (traditional bell housing) type tranny.

How much does a C6 transmission weight?

Thanks to these cutting-edge materials (for the 1960’s), the dry weight of a C6 transmission is 140 lbs, plus 30 lbs for the torque convertor. It requires 7-quarts of Type FA transmission fluid with the stock pan, plus an additional 2–4 quarts for the torque converter.

How can you tell the difference between AOD and E4OD?

For one, the AOD is rate for 750lb/ft of torque, the E4OD is rated for 1000lb/ft. And on the AOD if the TV cable isn’t adjusted right you’ll burn the AOD up.

How do you drive a Ford AOD transmission?

Hold 3rd gear by keeping it in D. Hold 2nd gear by keeping it in 1. Just remember if you’re slowing down to a stop and you’re holding 2nd gear in 1, once you get down to 5 mph or so it shifts into first and your car will jerk. So when you slow down @ about 10mph shift back into D or OD.

How long is a Ford AOD transmission?

AOD and AODE Transmissions Measurements

22 5/16 in.

Service station