Your question: What kind of transmission fluid does a 4l80e take?

Manufacturer Transmission Type Transmission Fluid

How much transmission fluid does a 4L80E take?

Transmission Fluid Capacity
Transmission (w/ Stock Pan) # of Quarts
GM 700R4/4L60E 6
GM 2004R 6
GM 4L80E 7.7

Are all 4L80E transmissions the same?

4L80E Differences:

’91 -’96: They are all pretty much the same. They were also known to have a crappy connector that passes through the case. Most have had them updated by now, but there are still some that haven’t and might need replacing.

Can I use ATF 4 instead of ATF 3?

ATF+4 is backward compatible with ATF+3 so you can use it with no issues.

Can I use ATF instead of ATF 4?

ATF +4 is a synthetic fluid for finely-tuned transmissions, so if you use a non-synthetic ATF instead of ATF +4 in a car or truck that calls for it, you could damage the transmission. You may use ATF +4 in most applications that call for older Dexron and Mercon fluids.

IT IS INTERESTING:  Quick Answer: What is a vertical engine?

Is the 4L80E a good transmission?

The GM 4L80E Automatic for Max Power and Good Cruisin’

Overdrive transmissions are great inventions. They allow a car to run deep rear gears for tire-smoking or wheel-hangin’ launches yet still maintain some semblance of highway cruising ability. The problem is durability.

How many quarts of transmission fluid do I need?

Your transmission may hold 15 to 20 quarts of fluid or more! If you simply drain the transmission fluid pan you will only change 3-5 quarts leaving lots of dirty fluid still in the system. This is an easier and less expensive way of changing your transmission fluid but will require more regular changes.

What years did Chevy use 4L80E?

GM 4L80-E transmission

Production 1991–2013
Body and chassis
Class 4-speed longitudinal automatic transmission

How much does a 4L80E transmission cost?

Replacement 4L80E Transmission Prices:

Transmission Street Smart Transmission Dealer Retail
4L80E 1875 2800

What vehicles came with a 4L80E?

Some vehicles which the 4L80E were used include:

  • Chevy Avalanche.
  • Chevy C2500 HD.
  • Chevy C3500 HD.
  • Chevy Express 2500.
  • Chevy Express 3500.
  • Chevy Express 4500.
  • Chevy K2500 Suburban.
  • Chevy Silverado 2500 HD.


Can you mix brands of ATF?

Is it OK to mix synthetic ATF with a conventional and/or synthetic blend ATF? Yes. Synthetic ATF and conventional fluids are 100 percent compatible with each other.

Is ATF 4 the same as power steering fluid?

Can ATF+4® be used as a power steering fluid in my FCA (formerly known as Chrysler) vehicle that requires ATF+4® in the automatic transmission? Yes, ATF+4® is the correct fluid to use for your transmission and power steering.

IT IS INTERESTING:  You asked: Is a car battery still good if it freezes?

What transmission fluid is compatible with ATF 4?

Designed specifically for Chrysler designed transmissions using specification MS-9602 ATF, Pennzoil Platinum® ATF+4 also is backward compatible for service fill where Chrysler ATF+3®, ATF+2® or Type 7176 ATF is called for in all applications in transmissions, power steering systems and hydraulic systems.

Is ATF better than power steering fluid?

Power Steering Fluid vs ATF

Is power steering fluid the same as transmission fluid? … But, the biggest difference is ATF contains detergents and friction modifiers. The detergents filter grease and dirt that may go into the power steering system and damage the pump and steering rack’s hydraulic valves.

What’s the difference between ATF 3 and ATF 4?

Graphs in the paper show that the friction coefficient of fresh ATF+3 and ATF+4 is essentially identical, but as the fluid ages ATF+4 retains the “as new” coefficient while ATF+3 degrades.

What type of ATF fluid do I need?

Dexron III/Mercon – This is one of the most common fluids on the market. Most GM and Ford units call for this type of ATF, as well as many imports. If your owners manual recommends any form of Dexron, or any Mercon – other than Mercon V – this is the fluid you want.

Service station